Search papers, labs, and topics across Lattice.
The paper introduces Delta6, a low-cost, 3D-printed, 6-DOF force/torque end-effector that uses antagonistic springs and magnetic encoders for accurate wrench sensing. A parametric analytical model is developed to predict and extend the device's force and torque limits. Experiments show that Delta6 achieves a 3.8% full-scale error after calibration with sequence models and successfully performs contact-rich tasks when integrated with a force-impedance controlled robot arm.
Forget expensive force sensors: this fully 3D-printed, open-source end-effector delivers surprisingly accurate 6-DOF force/torque sensing for under \$100.
This paper presents Delta6, a low-cost, six-degree-of-freedom (6-DOF) force/torque end-effector that combines antagonistic springs with magnetic encoders to deliver accurate wrench sensing while remaining as simple to assemble as flat-pack furniture. A fully 3D-printed prototype, assembled entirely from off-the-shelf parts, withstands peak forces above +/-14.4 N and torques of +/-0.33 N.m per axis; these limits can be further extended by leveraging the proposed parametric analytical model. Without calibration, Delta6 attains a 99th-percentile error of 7% full scale (FS). With lightweight sequence models, the error is reduced to 3.8% FS by the best-performing network. Benchmarks on multiple computing platforms confirm that the device's bandwidth is adjustable, enabling balanced trade-offs among update rate, accuracy, and cost, while durability, thermal drift, and zero-calibration tests confirm its robustness. With Delta6 mounted on a robot arm governed by a force-impedance controller, the system successfully performs two contact-rich tasks: buffing curved surfaces and tight assemblies. Experiments validate the design, showing that Delta6 is a robust, low-cost alternative to existing 6-DOF force sensing solutions. Open-source site: https://wings-robotics.github.io/delta6 .
