Search papers, labs, and topics across Lattice.
This paper introduces a real-time control and software architecture enabling fully autonomous, contact-based non-destructive testing (NDT) using a commercial Flyability Elios 3 quadrotor. The system integrates multi-rate control (200Hz low-level, 100Hz force estimation, 50Hz admittance/planning) with onboard sensors for autonomous operation in unstructured environments. Experimental validation demonstrates successful autonomous ultrasound NDT measurements, showcasing the potential for retrofitting commercial drones for physical interaction.
Untether commercial drones: a novel architecture enables fully autonomous, contact-based ultrasound NDT in unstructured environments using only onboard sensing.
This work presents an integrated control and software architecture that enables arguably the first fully autonomous, contact-based non-destructive testing (NDT) using a commercial multirotor originally restricted to remotely-piloted operations. To allow autonomous operation with an off-the-shelf platform, we developed a real-time framework that interfaces directly with its onboard sensor suite. The architecture features a multi-rate control scheme: low-level control is executed at 200 Hz, force estimation at 100 Hz, while an admittance filter and trajectory planner operate at 50 Hz, ultimately supplying acceleration and yaw rate commands to the internal flight controller. We validate the system through physical experiments on a Flyability Elios 3 quadrotor equipped with an ultrasound payload. Relying exclusively on onboard sensing, the vehicle successfully performs autonomous NDT measurements within an unstructured, industrial-like environment. This work demonstrates the viability of retrofitting off-the-shelf platforms for autonomous physical interaction, paving the way for safe, contact-based inspection of hazardous and confined infrastructure.
