Search papers, labs, and topics across Lattice.
This paper introduces a novel state estimation method for multirotor UAVs that leverages preintegrated accelerations derived from motor speeds, addressing the degradation of inertial measurements caused by propeller vibrations. By integrating these motor-derived accelerations into a factor graph optimization framework alongside LiDAR data, the proposed Motor Angular Speed LiDAR Odometry (MAS-LO) algorithm significantly enhances estimation precision. Experimental results demonstrate a 28% improvement in position and a 65% improvement in velocity estimation accuracy compared to the state-of-the-art LIO-SAM algorithm, along with reduced measurement lag and increased robustness to parameter errors.
Preintegrating motor speeds can outperform traditional inertial measurement methods, achieving unprecedented accuracy in UAV state estimation.
A precise state estimate is crucial for a tight feedback control that enables agile and near-obstacle flights of UAVs. The state-of-the-art methods fuse slow pose measurements with high-frequency inertial measurements to obtain a precise state estimate. However, the inertial measurements from the IMU onboard the UAV are degraded by vibrations from spinning propellers and the precision of the estimated state suffers. We propose a novel approach based on the preintegration of accelerations obtained from motor speeds. We show that the accelerations obtained in this manner can be used for state propagation on their own to achieve better precision without including the IMU. Further, we propose a factor composed of the preintegrated motor speeds that can be directly employed in factor graph optimization frameworks. We combine our factor with LiDAR measurements into the proposed Motor Angular Speed LiDAR Odometry (MAS-LO) algorithm for precise state estimation, which we open-source. Lastly, we evaluate the estimation precision against a state-of-the-art inertial algorithm LIO-SAM to show 28% improvement in position and 65% in velocity estimation accuracy, 14% lower measurement lag, and high robustness to wrong parameter values.
