Search papers, labs, and topics across Lattice.
This paper introduces a comprehensive computational pipeline that generates object-specific passive grippers for additive manufacturing, integrating various techniques such as RGB-D pose registration, surface-contact sampling, and topology optimization. By treating design elements as interconnected rather than isolated, the method ensures that each gripper design is uniquely tailored to the object's geometry and pose, enhancing the effectiveness of the manufacturing process. The results demonstrate that the proposed designs maintain high fidelity to the original object while achieving significant performance metrics in simulated trials, showcasing the potential for practical applications in robotics and manufacturing.
Object-specific passive grippers can be designed with unprecedented precision, achieving up to 97.6% fidelity to original object geometries while simplifying the manufacturing process.
This paper presents an end-to-end computational pipeline that converts a selected object mesh, a measured object state, and a selected six-axis robot into an object-specific, unactuated, additively manufacturable gripper. The method couples exact-mesh RGB-D/ICP pose registration, deterministic surface-contact sampling, uncertainty-aware wrench screening, selection among six passive capture mechanisms, object-conformal surface synthesis, full-orientation robot inverse kinematics, a swept-volume-aware manufacturing domain, directional fused-deposition finite-element screening, and constrained three-dimensional SIMP topology optimization. Unlike workflows that treat grasp selection, tool geometry, motion, and structural design as separate problems, every exported design is bound to the source mesh, object pose, robot flange, contact set, and insertion hypothesis by a traceable design identifier. We derive the implemented registration, contact, fit-tolerance, finite-element, and density-optimization equations and prove three properties of the numerical construction: nodal load preservation, monotonic compliance sensitivity under SIMP interpolation, and voxel-domain containment after topology post-processing. Four archived object-specific attempts - a rabbit, camera flange, 3DBenchy, and faceted bust - meet the nominal fit, uncertain-wrench, runtime-sweep, and baseline/post-topology FEA gates. A deliberately enlarged +/-3 mm, +/-5 degree pose stress check differentiates the designs, retaining 29-134 of 160 simulated trials. Their reconstructed topologies retain 92.0-97.6% of the FE domain because functional regions are protected. Archived robot photographs show the corresponding printed assemblies qualitatively, while nominal material properties and absent coupon-calibrated, instrumented tests keep all four at digital-screening status rather than operational release.
