Search papers, labs, and topics across Lattice.
This paper introduces a five-step integrated identification procedure to model the dynamic behavior of collaborative robots used in robot-assisted 3D printing, accounting for geometric, inertial, friction, and controller parameters. The key finding is that this integrated modeling approach yields a reliable dynamic model, even with the sensory and programming limitations of collaborative robots. Validated on a 6-DoF collaborative robot performing thermoplastic extrusion, the identified model closely matches experimental results, suggesting improved precision, control, and error prediction in these processes.
Collaborative robots can achieve higher precision in 3D printing through a new integrated system identification method that overcomes sensory and programming limitations.
In recent years, the integration of additive manufacturing (AM) and industrial robotics has opened new perspectives for the production of complex components, particularly in the automotive sector. Robot-assisted additive manufacturing processes overcome the dimensional and kinematic limitations of traditional Cartesian systems, enabling non-planar deposition and greater geometric flexibility. However, the increasing dynamic complexity of robotic manipulators introduces challenges related to precision, control, and error prediction. This work proposes a model-based approach equipped with an integrated identification procedure of the system's parameters, including the robot, the actuators and the controllers. We show that the integrated modeling procedure allows to obtain a reliable dynamic model even in the presence of sensory and programming limitations typical of collaborative robots. The manipulator's dynamic model is identified through an integrated five step methodology: starting with geometric and inertial analysis, followed by friction and controller parameters identification, all the way to the remaining parameters identification. The proposed procedure intrinsically ensures the physical consistency of the identified parameters. The identification approach is validated on a real world case study involving a 6-Degrees-Of-Freedom (DoFs) collaborative robot used in a thermoplastic extrusion process. The very good matching between the experimental results given by actual robot and those given by the identified model shows the potential enhancement of precision, control, and error prediction in Robot Assisted 3D Printing Processes.
