Search papers, labs, and topics across Lattice.
This paper addresses the sim-to-real gap in reinforcement learning for tendon-driven robots by developing a data-driven model to predict tendon forces based on contextual history, using a custom test-bench for data collection during contact-rich interactions. A transformer-based model predicts tendon forces with high accuracy (within 3% of max motor force) and is integrated into a GPU-accelerated rigid body simulation for RL training. The resulting RL policies, trained with the learned model, demonstrate a 50% improvement in fingertip pose tracking on real tendon-driven robotic fingers and reduce the sim-to-real gap by 41%.
Achieve a 50% boost in real-world control of tendon-driven robots by training RL policies in simulation with a learned tendon force model, bridging the sim-to-real gap.
Robots which make use of soft or compliant inter- actions often leverage tendon-driven actuation which enables actuators to be placed more flexibly, and compliance to be maintained. However, controlling complex tendon systems is challenging. Simulation paired with reinforcement learning (RL) could be enable more complex behaviors to be generated. Such methods rely on torque and force-based simulation roll- outs which are limited by the sim-to-real gap, stemming from the actuator and system dynamics, resulting in poor transfer of RL policies onto real robots. To address this, we propose a method to model the tendon forces produced by typical servo motors, focusing specifically on the transfer of RL policies for a tendon driven finger. Our approach extends existing data- driven techniques by leveraging contextual history and a novel data collection test-bench. This test-bench allows us to capture tendon forces undergo contact-rich interactions typical of real- world manipulation. We then utilize our force estimation model in a GPU-accelerated tendon force-driven rigid body simulation to train RL-based controllers. Our transformer-based model is capable of predicting tendon forces within 3% of the maximum motor force and is robot-agnostic. By integrating our learned model into simulation, we reduce the sim-to-real gap for test trajectories by 41%. RL-based controller trained with our model achieves a 50% improvement in fingertip pose tracking tasks on real tendon-driven robotic fingers. This approach is generalizable to different actuators and robot systems, and can enable RL policies to be used widely across tendon systems, advancing capabilities of dexterous manipulators and soft robots.
