Search papers, labs, and topics across Lattice.
This paper introduces FAM-DQ, a dual-quadrotor fully actuated aerial manipulator designed to overcome the limitations of conventional underactuated systems by providing high-torque interaction capabilities while maintaining precise control. By utilizing a unique configuration of quadrotor propulsion modules and a gear-driven servo for direction regulation, FAM-DQ achieves decoupled six degrees of freedom (6-DoF) control with omnidirectional manipulation. Experimental results demonstrate its effectiveness, achieving a maximum torque of 1.019 N路m with a torque-to-mass ratio of 2.28 N路m/kg, highlighting its potential for complex aerial manipulation tasks.
FAM-DQ delivers unprecedented torque-to-mass efficiency for aerial manipulators, enabling high-torque interactions without sacrificing control precision.
Aerial physical interaction requires aerial manipulation platforms to generate large interaction forces and torques while maintaining precise end-effector control. However, conventional underactuated aerial manipulators suffer from strong position-attitude coupling, whereas fully actuated platform designs often face structural complexity, limited payload capacity, and insufficient torque output. This paper presents FAM-DQ, a dual-quadrotor based fully actuated aerial manipulator designed for high-torque physical interaction tasks. By mounting two quadrotor propulsion modules at the ends of a central frame through passive joints, while using a gear-driven servo to regulate the pointing direction, FAM-DQ achieves decoupled $6$-DoF end-effector control with omnidirectional manipulation capability and enhanced torque output. Experiments including trajectory tracking, attitude tracking, static torque measurement, and screw driving validate the proposed design. FAM-DQ achieves a maximum torque of $1.019~\mathrm{N}\cdot\mathrm{m}$ with a total mass of $0.447~\mathrm{kg}$, corresponding to a torque-to-mass ratio of $2.28~\mathrm{N}\cdot\mathrm{m/kg}$.
