Search papers, labs, and topics across Lattice.
This paper introduces a novel tactile sensing system for humanoid robots that leverages the self-capacitance principle, addressing the limitations of conventional multilayer designs. By utilizing a single conductive fabric layer and a simplified wiring architecture, the system achieves scalability and low-latency detection while minimizing computational demands on the robot's main processor. Evaluation results indicate that sampling frequencies of 100 Hz and 1000 Hz effectively capture various interaction types, making the system suitable for full-body tactile sensing in companion robots like HIRO-chan.
A tactile sensing system that captures nuanced interactions with minimal latency and computational load could redefine humanoid robot responsiveness.
Tactile sensing is essential for humanoid robots to achieve safe physical interaction, dexterous manipulation, and truly human-like responsiveness. However, the design of such systems remains challenging. Conventional approaches often suffer from complex multilayer structures, intricate wiring, high cost, and poor scalability, making it difficult to realize full-body tactile sensing with real-time, low-latency detection while maintaining minimal computational load on the robot's main processor. In this work, we present a simple, scalable and hardware friendly tactile sensing system for a companion humanoid robot based on the self-capacitance principle. The proposed sensor system employs a single conductive fabric layer with a conductive fabric wire architecture and does not require intricate electrode patterning. Scalability was demonstrated by fabricating a 100-point sensor array on a flexible printed circuit (FPC). Evaluation across sampling frequencies showed that 10 Hz is insufficient and misses transient events, whereas 100 Hz and 1000 Hz reliably capture and clearly distinguish all interaction types: gentle touch, slow tapping, fast tapping, and hitting. A decision-tree classifier was implemented directly on the FPGA, offloading real-time inference from the Raspberry Pi 4 with minimal latency and negligible power overhead. This design fully meets the tactile sensing requirements of the HIRO-chan robot and is well-suited for full-body tactile sensing in HIRO-chan and other companion robots.
