Search papers, labs, and topics across Lattice.
This paper introduces a novel command supervision strategy for fixed-wing UAVs that integrates a learned residual supervisor above a conventional autopilot, addressing the challenges posed by wind and turbulence. By employing a Hamilton-Jacobi-Bellman (HJB) inspired approach to select residual commands from a finite action set, the method significantly reduces path-tracking error while maintaining the autopilot's stability. The results show an 86.77% improvement over the baseline autopilot, highlighting the effectiveness of the proposed strategy in scenarios where traditional methods struggle.
HJB-inspired residual selection slashes UAV path-tracking error by nearly 87%, revealing a new approach to command supervision that outperforms traditional autopilots in turbulent conditions.
A fixed-wing UAV must hold airspeed, altitude, and heading references under wind, gusts, and turbulence, channels coupled so that correcting one can degrade another. Classical autopilots stabilize the airframe well but adapt poorly when a hard crosswind meets an aggressive turn, while reinforcement-learning (RL) policies acting directly on the surfaces concentrate exploration risk at the actuator interface. We place a learned supervisor above an unchanged autopilot rather than inside it: it selects a residual from a finite, bounded action set on the commanded airspeed, altitude, and heading; the modified reference is projected into an admissible command envelope before reaching the autopilot, which stays the only actuator-facing controller. What is new is how the residual is chosen. HJB residual scores candidates with a semi-discrete value-iteration critic in the spirit of the Hamilton-Jacobi-Bellman (HJB) equation, ranks them by a no-op-relative Hamiltonian advantage, and filters them through a control-Lyapunov- and control-barrier-inspired finite-action shield that always keeps a no-op fallback. On a shared 12-state runtime holding the plant, autopilot, and actuator model fixed, so the comparison is at the package level, HJB residual lowers mean RMS path-tracking error to 44.809 m, against 338.617 m for the baseline autopilot and 88.809 m for a tabular-Q residual, an 86.77% reduction over the baseline and 49.54% over Q-learning. The gain concentrates where the baseline fails worst and comes with a measured rise in airspeed error, so no method dominates every metric. We present this autopilot-preserving residual command-supervision design and benchmark with its trade-offs reported intact.
