Search papers, labs, and topics across Lattice.
This paper introduces a cost-effective, autonomous UAV system for non-contact vibration-based structural damage detection, extracting vibration signals from video recordings via vision-based motion tracking. The system's performance was validated on a laboratory-scale frame structure under healthy and damaged conditions, comparing results against contact accelerometers and a finite element model. The UAV system successfully captured fundamental frequencies and damage-induced shifts, demonstrating its potential as a practical and scalable solution for structural health monitoring, despite slightly higher errors (up to 5.7%) compared to contact methods.
Skip the expensive sensors: a low-cost drone and some clever video processing can reliably detect structural damage by tracking subtle vibration changes.
This paper presents a non-contact approach for vibration-based structural damage detection using an autonomous and customized cost-effective unmanned aerial vehicle (UAV). Vibration signals are extracted from video recordings through vision-based motion tracking to identify shifts in natural frequencies indicative of structural degradation. A laboratory-scale frame structure is evaluated under healthy and simulated-damage conditions. The proposed system is validated through an experimental study involving two smartphones, a USB camera, and a custom-built low-cost UAV equipped with an onboard camera and an autonomous alignment system for operation in GPS-denied environments. The displacement time is extracted and analyzed in the frequency domain and compared to reference measurements from contact accelerometers and a finite element model. Experimental results show that all platforms successfully capture the fundamental frequency and its shift due to damage. Although the UAV exhibits slightly higher errors (up to 5.7%) due to platform-induced disturbances and sensing limitations, it reliably detects damage-induced frequency changes. Compared to commercial UAV systems, the proposed platform achieves comparable inspection performance at significantly lower cost. These results demonstrate that low-cost autonomous UAVs provide a practical, flexible, and scalable solution for structural health monitoring, particularly in scenarios where contact-based sensing is impractical. The findings also support the potential for the deployment of multiple cooperative UAVs to further enhance inspection coverage and robustness.
