Search papers, labs, and topics across Lattice.
This study introduces a novel 9-DOF, three-fingered Differential Direct-Drive (DDD) gripper that utilizes low-ratio (1:2) differential transmissions to enhance grasping performance while minimizing mechanical impedance and complexity. By centralizing actuator mass and coupling motors in parallel, the gripper achieves a nominal grasping force of approximately 18 N with a minimal motor contribution to system inertia of just 0.236%. The results demonstrate significant improvements in torque generation and physical interaction transparency, paving the way for advanced sensorless proprioceptive force estimation in robotic applications.
Achieving 18 N of grasping force with just 0.236% motor inertia, this gripper redefines the balance between torque, transparency, and dexterity in robotic manipulation.
Conventional robotic grippers often use high-ratio transmissions to generate grasping torque and external force sensors to measure physical interaction. High-ratio transmissions increase friction, reflected inertia, and mechanical impedance, while external sensors add hardware complexity. To address these trade-offs, this study proposes a novel 9-DOF, three-fingered Differential Direct-Drive (DDD) gripper that combines DD motors with a low-ratio (1:2) differential transmission. The mechanism centralizes actuator mass at the base to minimize moving-link inertia, while the differential architecture couples two motors in parallel to amplify torque during flexion. Experiments show that the prototype delivers a nominal grasping force of approximately 18 N and a fingertip force of 4.7 N, while maintaining a low motor contribution to system inertia (0.236%) and low passive mechanical impedance, with a maximum measured value of 50.1 N/m when the motors are unpowered. The proposed hardware addresses the trade-offs among torque, physical transparency, and kinematic dexterity, providing a foundation for high-bandwidth interaction and sensorless proprioceptive force estimation.