Track papers across labs, topics, and trends.
Search papers, labs, and topics across Lattice.
This paper introduces a contact-based 3-D surface measurement method utilizing Digital Fringe Projection (DFP) to enhance the accuracy of surface geometry reconstruction for reflective and transparent objects. By employing triangulation on a coated silicone contact surface, the approach mitigates the calibration challenges and depth accuracy issues associated with existing photometric stereo methods like GelSight. Experimental results demonstrate that this technique significantly improves measurement stability and precision, enabling reliable 3-D reconstruction across a variety of optical properties.
Achieving high-resolution 3-D surface measurements for reflective and transparent objects could revolutionize tactile sensing in robotics.
This paper presents a contact-based 3-D surface measurement method based on a Digital Fringe Projection (DFP) system, belonging to the vision-based tactile sensing family pioneered by the commercially successful GelSight sensor. Such sensors have proven effective for robotic fingertip manipulation and contact sensing. However, because GelSight employs photometric stereo with RGB LEDs, it does not measure absolute depth directly but instead infers it by integrating estimated surface gradients, which can accumulate reconstruction errors; in addition, it becomes increasingly difficult to calibrate as the sensing area grows, and its depth accuracy is challenged on highly reflective or transparent objects. To overcome these drawbacks, we propose a fringe-projection-based contact measurement technique that performs triangulation-based 3-D reconstruction on a coated silicone contact surface, providing dense per-pixel surface geometry and full-field 3-D shape measurement over the contact region. By integrating high-accuracy digital fringe projection into the sensor, our approach simplifies calibration over larger areas and enhances depth precision for complex surfaces. Experimental results, including a direct comparison with a GelSight Mini sensor, a sphere-fitting accuracy evaluation, and an uncertainty analysis, confirm that the proposed method significantly improves the accuracy and stability of structured-light-based 3-D measurements, allowing reliable reconstruction of objects with diverse optical properties.