Track papers across labs, topics, and trends.
Search papers, labs, and topics across Lattice.
This paper introduces a wrench-aware admittance control framework for robotic manipulation with unknown payloads, addressing the challenges posed by payload center of mass offsets. The approach uses force-torque measurements to both reduce payload-induced force effects during transport via a translational excitation term and to estimate payload mass and CoM offset after grasping. Experimental results on a UR5e robot demonstrate improved transport and placement accuracy compared to uncorrected admittance control, while maintaining compliant motion.
Compensating for unknown payload wrench offsets during robotic manipulation significantly improves transport and placement accuracy without sacrificing compliance.
Unknown payloads can strongly affect compliant robotic manipulation, especially when the payload center of mass is not aligned with the tool center point. In this case, the payload generates an offset wrench at the robot wrist. During motion, this wrench is not only related to payload weight, but also to payload inertia. If it is not modeled, the compliant controller can interpret it as an external interaction wrench, which causes unintended compliant motion, larger tracking error, and reduced transport accuracy. This paper presents a wrench-aware admittance control framework for unknown-payload pick-and-place using a UR5e robot. The method uses force-torque measurements in two different roles. First, a three-axis translational excitation term is used to reduce payload-induced force effects during transport without making the robot excessively stiff. Second, after grasping, the controller first estimates payload mass for transport compensation and then estimates the payload CoM offset relative to the TCP using wrist force-torque measurements collected during the subsequent translational motion. This helps improve object placement and stacking behavior. Experimental results show improved transport and placement performance compared with uncorrected placement while preserving compliant motion.