Track papers across labs, topics, and trends.
Search papers, labs, and topics across Lattice.
This paper presents a fully open-source photogrammetry pipeline to generate sub-meter resolution lunar DEMs from Chandrayaan-2 OHRC multi-view imagery. They identify suitable stereo pairs through geometric analysis of image metadata, generate point clouds via dense stereo correspondence and ray triangulation, and grid these into DEMs. Validation against LRO NAC data achieves a vertical RMSE of 5.85 m and horizontal accuracy of <30 cm, demonstrating the feasibility of high-resolution lunar mapping using open-source tools.
Open-source photogrammetry can now produce sub-meter resolution lunar DEMs rivaling those from proprietary pipelines, unlocking new possibilities for lunar exploration and research.
High-resolution digital elevation models (DEMs) of the lunar surface are essential for surface mobility planning, landing site characterization, and planetary science. The Orbiter High Resolution Camera (OHRC) on board Chandrayaan-2 has the best ground sampling capabilities of any lunar orbital imaging currently in use by acquiring panchromatic imagery at a resolution of roughly 20-30 cm per pixel. This work presents, for the first time, the generation of sub-metre DEMs from OHRC multi-view imagery using an exclusively open-source pipeline. Candidate stereo pairs are identified from non-paired OHRC archives through geometric analysis of image metadata, employing baseline-to-height (B/H) ratio computation and convergence angle estimation. Dense stereo correspondence and ray triangulation are then applied to generate point clouds, which are gridded into DEMs at effective spatial resolutions between approximately 24 and 54 cm across five geographically distributed lunar sites. Absolute elevation consistency is established through Iterative Closest Point (ICP) alignment against Lunar Reconnaissance Orbiter Narrow Angle Camera (NAC) Digital Terrain Models, followed by constant-bias offset correction. Validation against NAC reference terrain yields a vertical RMSE of 5.85 m (at native OHRC resolution), and a horizontal accuracy of less than 30 cm assessed by planimetric feature matching.