Track papers across labs, topics, and trends.
Search papers, labs, and topics across Lattice.
This paper introduces a novel hand-eye calibration method for ground-observing mobile robots using a referencing plate that combines laser tracker 3D metrology and camera-based 2D imaging. The method estimates the poses of the plate, camera relative to the plate, and robot, enabling the computation of the robot-camera transformation. Experimental results demonstrate sub-millimeter repeatability, improving the accuracy of vision-based floor measurements.
Achieve sub-millimeter repeatability in camera-to-robot calibration by fusing laser tracker and camera measurements via a novel referencing plate.
A novel hand-eye calibration method for ground-observing mobile robots is proposed. While cameras on mobile robots are com- mon, they are rarely used for ground-observing measurement tasks. Laser trackers are increasingly used in robotics for precise localization. A referencing plate is designed to combine the two measurement modalities of laser-tracker 3D metrology and camera- based 2D imaging. It incorporates reflector nests for pose acquisition using a laser tracker and a camera calibration target that is observed by the robot-mounted camera. The procedure comprises estimating the plate pose, the plate-camera pose, and the robot pose, followed by computing the robot-camera transformation. Experiments indicate sub-millimeter repeatability.